Hi there, i am planning a trip to the Bristol Studio to record a mix and wondered if i could bring my Rolan Go:Mixer interface and plug into Master 2 on the DJM Mixer?
2 Likes
Hey mate! I’m pretty sure that would work, if you take out of the REC out on the DJM and route it into 2 inputs!
But pioneer have an app called “djm-rec” or something along those lines? It has a 30 day free trial and it allows you to use your phone to record mixes in a load of different formats just by plugging it into the USB in of the mixer. You can record as WAVs/AAC in different file sizes and you can even edit your set with a few basic features after. I haven’t personally tried it yet but i’ve only heard good things said about it.
2 Likes
Let me know if that doesn’t work for you and i can help find the right connections for your GO
Nice one cheers, I will take a butchers at that App. will also take my RGM see if it works first time.
Many thanks for the reply.
1 Like
pioneer mixers have internal soundcards in them so if your bringing your laptop you can connect direct into the USB slot using a USB B cable
You will need to grab the firmware here - https://www.pioneerdj.com/en/support/software/mixer/djm-900nxs2/
You then nominate a channel using the djm mixer app on the laptop and send output to that channel using the laptop selection on the mixer channel
Instruction manual which i found helpful is here
https://docs.pioneerdj.com/Manuals/DJM_900NXS2_DRI1300A_manual/?_ga=2.265126477.334642735.1614100307-1605335034.1612451027&page=18